E-Mail: ambicaboiler@yahoo.co.in  
Quick Contact: +(91) - 9879091953,  
Visit Our Other WEBSITE  
  Pharmaceutical Equipment  Our Products
Mass Mixer
We manufacture better quality of pharmaceuticals equipments that are used for producing powders and particulate in the pharmaceutical industry. The pharmaceutical processing equipment includes low capacity dryers designed for specific potent powders as well as industrial size plants for permanent operation under strict hygiene standards. The product applications include preparation of analgesics, antibiotics, enzymes, proteins, vaccines and vitamins.

Mass mixers are special pharmaceutical machinery used for through mixing of wet as well as dry or lump material, especially suited for tablet granulation. The Mass Mixer Machine is basically mixing an assembly wherein the mixing stirrer is in horizontal position in the container Mass Mixer & has a single speed, simple rotation. The stirrer rotates around itself at a very slow speed inside the bowl and thereby achieving intimate mixing of dry or wet materials of Tablet Granulation, Powder, Chemicals, and Food & Confectionaries Materials.

We deal in manufacturing and export of superior quality mass mixers, that are available in different over flow capacities, working capacities to choose from. These mixers are furnished with tilting device for easy unloading of the material. Easy to operate and clean, these machines can endure intense conditions.
Note: Dimensions & Technical Details are subject to change as per customers' requirement without any further notice.
  • Suitable for mixing of dry & wet material.
  • All contact parts in stainless steel.
  • Paddles so arranged on the shaft to give thorough uniform mixing.
  • Tilting arrangement, reversible switch and safety switch to stop the mixer as soon as the cover is opened.
The drive is through a system of suitable gear-box and motor.
Technical Specifications
Capacity 50 Kgs 100 Kgs 150 Kgs 200 Kgs
Over Flow Capacity 110 Ltrs 220 Ltrs 330 Ltrs 440 Ltrs
Working Capacity 88 Ltrs 156 Ltrs 234 Ltrs 309 Ltrs
Motor, 440V, 3Ph, 50 CS, AC 3 HP 5 HP 7.5 HP 7.5 HP
Depth in 1700 2030 2135 2260
Height in 940 1120 1300 1300
Width in 740 635 790 790
Octagonal Blender
The Octagonal Blender is an efficient and versatile blending machine for mixing and lubrication process. Octagonal Blender with Cylindrical Container of dry granules equally. It can be used for pharmaceutical, food, chemical and cosmetic products etc.
  • Contact parts in stainless steel 304 or 316
  • Octagonal shaped with rectangular center, conical discharge frustum and rectangular top frustum
  • Baffles provided in the shell
  • Manhole with gasket is provided to fix baffles and for ease of cleaning the shell
  • Charging and discharging is through a butterfly valve. A conical adaptor can be provided for fixing charging drum after butterfly valve
  • Unit can be provided with bin charging arrangement
  • All moving parts are enclosed in guards
  • A safety railing with a limit switch is provided for operator safety
  • Manual Inching arrangement can be provided
  • Flame - proof motors with flame - proof push button stations can be provided
These benders are extensively used in
  • Mixing dry powder for tablets and capsules formulations.
  • Mixing dry granules sub lots to increase the batch size at bulk lubrication stage of tablet granules
Technical Specification

OB 50 125 100 0.5 8 6" 1100 2000 2200
OB 100 250 200 1 8 6" 1200 2200 2500
OB 150 375 300 1 5/10 6" 1400 2200 2500
OB 200 500 400 1.5 5/10 6" 1400 2400 2600
OB 250 625 500 2 5/10 8" 1500 2600 2600
OB 500 1250 1000 3 5/10 10" 1800 2800 2900
OB 1000 2500 2000 5 5/10 12" 2000 3000 3200
Note: Dimensions & Technical Details are subject to change as per customers' requirement without any further notice.
Double Cone Blender
Capacity from 10 Liters upto 3500 Liters, Double Cone Blender is an efficient for mixing dry powder and granulates homogeneously. All the contact parts are made of stainless steel. Two-thirds of the volume of the Cone Blender is filled to ensure proper mixing. It can be used for Pharmaceutical, Food, Chemical and Cosmetic products etc.
Salient Features
  • The conical shape at both ends ends enables uniform mixing and easy discharge
  • The cone is statically balanced to avoid anyexcessive load on the gear box and motor.
  • While the powder can be loaded into the conethrough a wider opening, It can be discharged through a mucon valve or a slide valve
  • Depending upon the product, paddle types baffles can be provided on the shaft for better mixing
  • Maximum care has been taken ensure safe operation of he unit. It can also be operated by a timer
  • The contact parts are either made of SS 304 or 316
  • Flame proof motor can be supplied as optional
  • Capacity 10 Ltrs. to 5000 Ltrs.
gmp double cone blender

Model Brim Working Power Speed Discharge Dimensions
  Capacity Capacity  



  Litres Litres HP RPM Inches mm mm mm
DCB5 17 10 0.5 25 4 800 450 1200
DCB10 35 20 0.5 25 4 800 600 1200
DCB25 100 50 1 25 4 1000 800 1200
DCB50 175 100 2 25 4 1200 1000 1400
DCB100 350 200 3 25 6 1250 1250 1400
DCB150 500 300 3 25 6 1350 1350 1400
DCB200 700 400 5 20 6 1400 1500 1500
DCB250 850 500 5 20 6 1500 1800 1800
DCB500 1750 1000 7.5 20 8 1800 2200 2200
DCB1000 3500 2000 10 15 8 2000 2400 2400
Note: Dimensions & Technical Details are subject to change as per customers' requirement without any further notice.
Tray Dryer
Salient Features :
  • Construction: External : 2MM THK Internal : 2MM THKMOC: cGMP
  • Surface Finish : External:Buffed to 150 grit matt finish Internal: Buffed to 220 grit mirror finish.
  • Inlet & Outlet: All dryers have a 5 micron pre filter r at the inlet and a manually infinite adjustabledamper at the outlet.
  • Door : Doors at provided at the front and / or rear side of the dryer. Door lips are lined with silicon ruuber gasket to preventany leakages. Suitable locking is provided for the doors.
  • Air Circulation : Air circulation is done by specially designed recirculation blowers inside thedryer. The blower capacity , static & design depends on the size and model of dryer.
  • Heating : Dryers are normally supplied with either steam / electric / thermic fluid / hot water heating system. Suitable heating coils / caloriefiers are provided in the dryers.
  • Temperature Control : Temp control system is done by electronic digital temp controller fitted in the control panel. The temp control in the dryer is fully automatic.
  • Trays : Trays are available in S.S. 304 / 316 q. All trays are fully die pressed and with cooved corners. Trays are buffed to mirror finish. Trays are also available in aluminium / Polypropelene / Frp / M.S. galvanized as per clients reqiuirements.
  • Trolley : Trolley is provided in the dryers to accommodate trays in it. Trolley truck are used to load and unload the trays into the dryer.
  • Control Panel : Automatic Control panel is fitted on the side of the dryer. If consists of Starters, contactors, safety relays, ckt breakers, indicating lamps, push buttons , timers, controllers etc.
GMP Tray Dyrer



TD-48 TD-96 TD-192
Loading capacity

12 Trays

24 Trays

48 Trays 96 Trays 192 trays
External Dimensionin mm

1370 X 530
X 940

1370 X 940
X 940

1980 X1020 X1880
3320 X 1900
X 1880
Internal DimensionIn mm 840 X 430 X 840

840 X 860 X 840

1020 X930 X1830 1960 X930 X1830 1960 X930 X1830
No of Doors One One One Two Two
No of Blowers One Two One Two Four
No of motors / H.P.3 Phase 415 Volts. 1 / 0.5 H.P.3 phase 415 volts.

1 / 0.5 H.P.3 phase 415 volts

1 / 1 H.P.3 phase 415 volts 2 / 1 H.P.3 phase 415 volts Four / 1 H.P.each3 phase 415 volts
ElectricalHeating Load for100°C / 200°C / 300°C 3kw / 6kw / 9kw

6kw / 9kw / 12kw

9kw / 15kw / 18kw 15kw / 21kw / 27kw 36kw / 42kw / 48kw
Steam HeaterNo. of coils. 2 2 2 2 2
Steam Pressure 3.3 kg / cm2

3.3 kg / cm2

3.3 kg / cm2 3.3 kg / cm2 3.3 kg / cm2
Steam consumption 25 LBS / hr

45 LBS/hr

60 LBS / hr 80 LBS / hr 120 LBS / hr
in mm100°C / 200°C / 300°C
50 / 75 / 75 50 / 75 / 75 50 / 75 / 75 50 / 75 / 75 50 / 75 / 75
No of Trolleys Rack System Rack System One Two Four
Tray Size 812 X 406 X 31 812 X 406 X 31 812 X 406 X 31 812 X 406 X 31 812 X 406 X 31
Trolley Dimension Fixed Racks Fixed Racks 840 X 960 X 1780 840 X 960 X 1780 840 X 960 X 1780

 Note: Dimensions & Technical Details are subject to change as per customers' requirement without any further notice.  

V Blenders
Operation :
The "V" Blender is an efficient and versatile blending machine for mixing and lubrication process of dry powders homogeneously. Approximate two third of the volume of the Blenders filled to ensure proper mixing. The "V" Blender gives best result for powders due to suitable medium speed and "V" shape of container. It can be used for Pharmaceutical, Food, Chemical and Cosmetic products etc.

In "V" Blender the powders comes from all sides due to the "V" shape of the product container, hence requirement of RPM is medium. Suitable mainly for powder & granules type material. This type of material gets sufficient continuous movement. Due to the "V" shape of container, even medium movement will result in good quality of blending/lubrication of granules.

Silent Feature :
  • Suitable for dry mixing of products in powder form.
  • Easy for loading and unloading.
  • Easy for cleaning.
  • All contact parts are made out of SS304/SS316 or SS316 L quality material, as per customer requirement.
  • Simple design requires minimum maintenance.
  • General structure & safety guards made out of mild steel & colored in Standard Model and made out of SS304 & polished to the matt finish in GMP Model
  • The "V" shape gives sufficient continuous movement to the granules, result in good quality.
  • Maximum care has been taken to ensure safe operation of the unit.
  • Manual rotating facility with hand wheel for inching.

Other Option Available :

  • Vacuum Loading facility for material charging
  • Flame proof drive motor along with flame proof starter
  • Contact parts made out of SS316 or SS316 L instead of SS304.
GMP V Blender
Technical Specification
MODEL Gross Cap in ltrs Working Cap in Ltrs OVERALL DIMENSIONS HP
Length Width Height
25 50 30 1100 760 1375 1.5
50 100 55 1400 760 1575 2.0
100 200 110 1525 1000 2450 2.5
250 500 280 1850 1100 2770 7.5
500 1000 560 2000 1250 3800 10.0
1000 1850 1200 2300 1400 4200 15.0
Reaction Vessel
We offer high quality reaction vessel in different capacities ranging from 50 liters to 15,000 liters. Fabricated from superior grade of stainless steel, these vessels can be provided with different types of agitators such as anchor type, propeller type, paddle type, pitched blade turbine type of high-speed homogenizer. The unique design of our reaction vessels allow the conditions to be controlled for fastest possible chemical reaction.
  Salient Features:
  • Material of construction: SS 304/SS 316L
  • MS/SS Jacket or limpet coil for steam heating, cooling
  • Shaft entry sealed by oil seal, plain or water-cooled stuffing box, single or double mechanical seal
  • High-density glass wool insulation & SS cladding can be done on demand
gmp reaction vessel
Vacuum Tray Dryer
  • All stainless steel 304 / 316 / 316L CGMP or mild steel externals with stainless steel internals (vapor and product contact parts)
  • Hollow pad type heating shelves which are easily removable for maintenance
  • Condensor and condensate receiver fitted on the dryer body or stand alone for remote installation
  • Fully welded skirt on vacuum dryer body for flush mounting through the wall
  • External insulation of dryer with protective panels in stainless steel or mild steel powder coated
  • Dedicated fluid heating and circulating systems. These can be steam or electrically heated. Fluid heating systems are available for water as well as thermic fluid.
    ( for temperature requirements above 95 degree centigrade )
  • Validation ports and nitrogen purge nozzles
  • Steam sterilisable models available
  • Double door loading available for larger models
  • Tray size is 16 x 32 x 1.25 (h) inches
Vacuum Tray Dryer
Capacity: 6 up to 96 Trays,

Vacuum Tray Dryer are used where heating and drying are essential parts of manufacturing process in industries such as Chemicals, Dye stuff, Pharmaceutical, Food Products, Colors etc. Vacuum Tray Dryer is suitable for drying of thermal sensitive material easily deteriorated under higher Temperature. It eliminates configuration damage of the drying materials 

Bodies may be of cylindrical or rectangular cross section. Both shelves and body are heated (the body to prevent internal condensation) with controlled circulation of hot water, steam or dia thermic fluid. Vacuum is drawn through large diameter ducts to minimize pressure drops and produce minimum working pressures. Both rotary and static dryers can be supplied with the following Optional ancillaries.

  • Heater system for either pressurized hot water or dia thermic fluid.
  • Cyclones and sleeve filters for powder recovery (for rotary dryers)
  • Solvent recovery system with condenser and receiver, vacuum pump and ancillaries, characteristics and dimensions depending on the drying processes.
Dry Heat Steriliser (G.M.P. Model)

The Dry Heat Sterilizer is used in Pharmaceuticals and Biotechnology for sterilization and dehydrogenation of glassware, containers, vessels, machine and components.

We can offer you systems that comply with the most exacting international regulatory requirements for your critical process needs.

Our Dry Heat Sterilizers are available in two options - Class 100 and Class 10,000. We also give you a wide range of choices on the chamber capacity, loading configurations and process control and recording.
The DHS finds application for humidity sensitive materials such as glassware and metal containers that can be sterilized by steam sterilizers but cannot dehydrogenate the load.

At ABF, we assure the performance of DHS meeting the following specifications.

STERILIZATION: Reduction of microbial spore forms up to 12 log reduction.



The DHS operation is based on hot air recirculation technique.
The centrally placed load is subjected to hot air circulation by means of an impeller and heater bank arrangement.
Centrally placed impeller ensures circulation via heater bank spaced in the recirculation zone.
Clean air for recirculation is sucked via the Pressure module through a pre filter and high retention HEPA filter (99.997% efficiency)
The efficiency of DHS depends on the velocity and circulation pattern of air within the sterilization zone.


· The inner chamber is fabricated from S.S. 316 or S.S. 316L and is fully welded to ensure a crevice free and easy to clean environment.
· Temperature Uniformity +/- 5 degree Celsius guaranteed within the chamber for the entire cycle.
· STERILIZATION efficiency of 12 log reduction.
· HEPA filter of 99.97% performance for clean air.
· Extended shaft motor for chamber recirculation.
· Positive Pressure throughout the cycle for 100% Sterile integrity of the load.
· Automatic plc controlled cycle with user-friendly operator interface for visual monitor and control over the entire cycle.
· Blind Temperature Controller for overshoots temperature condition.
· From the point of view of chamber safety, the heater bank and fan motor are electrically interlocked.
· Door Interlocking to prevent simultaneous opening of both doors.
· Door Process lock to prevent opening of doors when process is on.
· "Sterile door lock" to prevent sterile door opening unless the sterilization cycle has been successfully completed.
· Circulation Blower or heater malfunction alarm.
· Automatic Fh Calculator with facility for control in case of heat labile materials.
· On-line printing [alpha-numeric and graphical ] for process documentation.

· Glassware (Containers such as ampoules, vials etc.).
· Metal trays.
· Containers and metal material.
· Machine and accessories used in production.
· Various types of humidity sensitive material.
Optional Features:

Thyristor controlled operation : For efficient control of heater bank, thyristorised operation via PLC can be optionally provided giving an advantage of better temperature control and uniformity.
Class 100 DHS :

With a view to comply with the latest G.M.P.  we put to test the technical expertise of our dedicated engineers to successfully developed the CLASS-100 Sterilization Systems.
· High temperature HEPA filters (0.3 micron, performance 99.97%) are installed in the circulation loop to ensure Class-100 environment in the chamber.

· Differential pressure indicators for monitoring performance of HEPA filter bank.
· Improved filter seating arrangement for maximum filter surface.
· New baffle design for uniform airflow and temperature uniformity between the top-bottom and sides of the sterilization chamber.

Class 100 Dry heat sterilizer
Working Space in mm Cubic Feet Heating Load (kw).
900 x 900 x 1200 ht. 36 24  
900 x 1200 x 1200 ht. 48 30  
1200 x 1200 x 1200 ht. 64 36  
1200 x 1200 x 1500 ht. 80 48   
Or As per Customers Requirement    
Steam Sterilizers / Autoclave
ABF research and development efforts resulted in good quality products with excellent and precise process control as per needs of customer and their level of satisfaction.

Steam sterilizers are available in different models and for the suitable applications.
  • Vertical sterilizers (Microbiology lab) with swing doors.
  • Horizontal cylindrical sterilizers (Microbiology lab) with conventional radial arm.
  • Horizontal rectangular sterilizers with conventional radial arm and also with sliding doors.
  • Bung processor cum sterilizer.

All models are available with SINGLE/DOUBLE door design except vertical which is available only with single door.
Special Features :

  • Specially designed chamber to ensure complete condensate removal.
  • Specially designed connector/nozzles sanitary type to avoid any chances of contamination.
  • Special welding technique to avoid welding depressions inside the chamber.
  • Excellent chamber finish with crevice free construction to avoid chances of contamination.
  • Uniform distribution of steam to achieve uniform temperature + 0.1.5oC
  • Sterile air filter (0.01micron) for vacuum break is provided on sterile side.
  • Automatic control with PLC based Sterilizer control panel.

Safety Features :

  • Both doors will not open simultaneously.
  • Both doors will not open when process is on.
Homogenizer/ Emulsifier
We offer technically advanced and highly efficient homogenizers and emulsifiers for mixing, suspending, solubilizing, milling, dispersing and disintegrating solids. The homogenizer comprises stator and rotor assembly, with rotor rotating inside the stator assembly that is fixed with three tie rods to the motor


  • Rotor shaft is directly coupled to motor
  • It can be directly mounted on the vessel or can be hanged on a separate movable stand with lowering and lifting arrangement
  • Reduces batch time
  • Capacity: 0.25 HP to 15 HP (Standard and GMP model)
  • With SS 304 or SS 316 contact parts
Mixing capacities vary according to the process material, viscosity, shape of vessel
Cylindrical Autoclave
We are manufacturers of triple walled horizontal autoclave India since 1991. Our horizontal autoclave are widely used for day to day mass scale sterilization procedures and in various bulk laboratory applications, where dryness of the sterilized medium is of paramount importance, given the fact that semi dry sterilized media is prone to various micro-bacterial and viral infections. We specialize in both standard and customized models, specifically designed to meet the challenging demands of various scientists for individual and specialized research applications. Over a short period of time ABF brand have been established as reliable manufacturer of horizontal autoclave in India, catering to the vast market of India  Apart from that we are supplying our autoclave in India , catering to a variety of customers ranging from Defence Installations, Research Laboratories, Educational Institutes and various R and D laboratories of leading national and multinational companies.

  •  Steam Stock Provision
  •  Versatile usage
  •  Stainless steel construction
  • Ergonomic Design
  • Energy Efficient
  • Double Safety Radial Locking Arrangement
  • Double Safety Valve Protection
  • Hydraulic Testing Upto 2.5 times the working pressure
  • Calibration And Protocol Documentation
cylindrical autoclaves
ETO Sterilizer
Door: Double door & Auto door models are available for clean room applications.  Low cost per cycle: Lowest operating costs compared to other available options.   Advantages of Automation:  
  • During Sterilization a Microprocessor / PLC controls temperature, Moisture, Gas Injection, Gas Exposure and all critical time and pressure based parameters.
  • Important sterilization parameters like Phase Status, Current Values & set values, continuously displayed at all times on Controller Screen.
  • Continuous display of Temperature, Humidity and Pressure On-line allows user to be aware of Cycle status at all times.
  • Temperature uniformly and accurately maintained throughout the chamber to within ± 4°C of the Set Sterilization temperature.
  • The advanced SCADA software provided stores detailed records of Process-Data for every cycle.
  • Reports are available in Data, Summary and Graph formats for every batch of goods sterilized.
  • User can re-print reports as and when required, using any normal printer.
  • Digital storage of data cuts cost, saves space, ensures safety of data and negates cost of expensive thermal printing.


  • All machines are available with conventional hinged doors, or Modern Automatic sliding door options.
  • Conventional Centrally locked Manual doors Or Modern horizontal / Vertical Sliding doors
  • Kind of ETO:CO2 Mixture (Lean / Concentrated) to be used.
  • The MOC (Material of Construction) is decided taking into consideration, whether it is for Medical Devices or for sterilizing Food or Spices.
  • Locational differences in availability of electricity and operational voltages are considered when designing machines.
  • Existing standards for operation / gas release etc. in the country / region where the machine is to be installed.
  • Machines are designed for optimums performance while ensuring lowest operational cost.
  • All Machine are built and tested as per Exiting international standards
eto sterilizer
Chemical Machinery & Equipment
Pharmaceutical Equipment
Paint Machinery
ETO Sterilizer
Alkyd Resin Plant
Paint Disperser
Shampoo Manufacturing Plant
Chemical Machinery & Equipment Reaction Vessel | Condenser/ Heat Exchangers | Agitators | Ribbon Blender | Ball Mill | Rotary Vacuum Paddle Dryer | Tray Dryers | High Speed Stirrer | Sigma Mixer
Pharmaceutical Equipment Mass Mixer | Octagonal Blender | Double Cone Blender | Tray Dryer | V Blenders | Reaction Vessel | Vacuum Tray Dryer | Dry Heat Steriliser (G.M.P. Model) | Steam Sterilizers / Autoclave | Homogenizer/ Emulsifier | Cylindrical Autoclave | ETO Sterilizer
Paint Machinery High Speed Disperser | High Speed Stirrer | Ball Mill | Pug Mill/ Pug Mixer | Sigma Kneader | Bead Mill | Sand Mill
Sterilizer Dry Heat Steriliser (G.M.P. Model) | Steam Sterilizers / Autoclave | ETO Sterilizer
ETO Sterilizer
Alkyd Resin Plant Oil Alkyd Resin Plant
Paint Disperser
Shampoo Manufacturing Plant
© Ambica Boiler & Fabricators. All Rights Reserved Powered by : #1 ABF - #1 Web Designing :: Web Design Outsourcing Company