50L laboratory reactor with condenser for extraction
Laboratory Reactor Features:
1. fully sealed systerm,there is no fog or oil mist at low temperature/ high temperature.
2. the temperature can continue heating or cooling from -60℃- 200℃.
3.fast up /drop the temperature.
4.Widely used in chemical, biological, and physical laboratories.
Laboratory Reactor advantage:
The whole liquid circulation is a closed system. There is no water vapor absorption at low temperature, no oil mist is generated at high temperature, and the temperature can be continuously raised and lowered from minus 60 to over 200 degrees. The fully closed pipeline design and high efficiency plate heat exchanger are adopted. Reduce the thermal fluid demand while providing the system’s heat utilization rate to achieve rapid rise and fall temperatures. It is widely used in chemical, biological and physical laboratories. It is a cold and heat source equipment for universities, environmental protection, biochemistry, medical, chemical, scientific research, genetic engineering, polymer engineering and other laboratories.
Stainless steel Laboratory Reactor
*Chemical Pilot Reactor
This equipment is including: Reaction vessel, mixing system, vacuum system, condenser, separator, conduction oil preheating system, platform
2.Including jacketed reactor,condenser,storage tank,conduction oil preheating tank,hot oil pump,pipelines,valves,temperature gauge PT100,pressure gauge,platform etc.
3.Made of SUS316L and SUS304.
4.Heating and cooling by jacket or heated by jacket and cooling by inner pipe coil
*Model selection reference of reaction kettle
|Design Pressure (Mpa)||Atmospheric Pressure or under pressure|
|Material||Carbon steel, stainless steel, enamel, graphite|
|Heating Forms||Electrical heating with medium in jacket, external half coil steam heating, external half conduction oil heating, hot water infrared heating etc.|
|Cooling Forms||Refrigeration medium in the internal pipe jacket|
|Blending Power||Model selection is made according to material viscosity, liquid-solid ratio, liquid specific gravity, solid specific gravity, solid granularity, rotation speed, paddle type, with or without baffle or internal coil.|
|Stirring blade Forms||Anchor type, frame type, flat paddle type, pitched paddle type, ribbon type, turbo type, pusher type and multiple compound type|
|Seal||Mechanical seal or stuff packing seal|
|Inner Surface Treatment||Polished or no polished|
|Discharge Valve||Flanged ball valve, open downward discharge valve and others|
|Technological Pipe Hole||Manhole, sight glass, distillation mouth, imported materials, pressure gauge port, temperature, mouth, mouth filling N2,|
|ModelParameter||Reactor Volume(L)||Mixing speed (rpm)||Heat exchange surface (m2)||Separator(L)||Total power(including heating power)(KW)|
|Note: In case of inconformity of the data in the table due to technical improvement or customization, the real object shall prevail.
This equipment is including: Reaction vessel, mixing system, vacuum system, condenser, separator, conduction oil preheating system, platform.1. Heating and cooling method: 1. Heating and cooling by jacket. 2. Heating by jacket and cooling by inner pipe coil.
2. Type of electrical device: 1. Ex-proof type. 2. Normal type
3. Electric cabinet control mode: 1. Touch-screen control. 2. Button control